Scuro Professional Thermal Heat Cap
890,00 MDL
Professional Thermal Hair Cap
The professional thermal cap is designed for uniform hair heating during cosmetic procedures. The adjustable temperature and built-in timer allow you to choose the optimal mode for various treatments and professional products.
Technical Specifications
-
- Model: NS-HP
- Voltage: 220–240 V
- Power: 50 W
- Dimensions: 25 × 17 cm
Controller Functions
The display shows:
-
- temperature;
- operating time;
- heating level;
- power indicator.
Adjustment Ranges
-
- Temperature: can be adjusted between 30 and 70 °C.
- Timer: can be set between 10 and 60 minutes.
Heating Levels
-
- Level 1: temperature below 40 °C.
- Level 2: temperature between 40 and 50 °C.
- Level 3: temperature between 50 and 70 °C.
Controls
Power Button
-
- Turns the device on and off.
Temperature Adjustment Buttons (+ / –)
-
- Short press: changes the temperature by 1 °C;
- Long press: allows rapid value adjustment.
Timer Buttons (+ / –)
- Short press: changes the time by 1 minute;
- Long press: allows rapid duration adjustment.
Description
Instructions for Use
-
- Connect the device to the power supply.
- Press the power button.
- Set the desired temperature.
- Select the operating time.
- Maintain temperature automatically after reaching the set value.
- Run until the programmed time expires.
- Disconnect the device from the power supply at the end.
Memory Function
-
- Save last temperature and time settings automatically.
- Retain settings upon reconnection to the power supply.
- Reuse saved settings for the next procedure.
Operating Characteristics
- Vary slightly between real and set temperature during heating.
- Consider this fluctuation normal for the device.
- Ensure it does not affect procedure efficiency.
